Setting up a small home network windows xp

Figure F. Figure G You can configure the firewall to allow outside users to access specific services. Editor's Picks. The best programming languages to learn in Check for Log4j vulnerabilities with this simple-to-use script. The map shows how devices are connected and includes any problem areas. It can be helpful for troubleshooting.

For Windows 7, certain sharing options turn on automatically. For example, when you change your network location to Home or Work, network discovery is automatically turned on. Similarly, file sharing turns on automatically the first time you try to share a file or folder.

There are three network discovery states:. Windows 7 automatically adjusts security and other settings based on the type of network connected to your device. If you skip this step, then the first time that you connect to the network, you'll be asked to select your network location. You can change this setting later.

The network offers some protection from the Internet such as a router and firewall and contains known or trusted devices. Network discovery is turned on automatically. Most small business networks fall into this category. The network is available for public use. Examples of public networks are public Internet access networks, such as those found in airports, libraries, and coffee shops. This network location helps keep your device from being seen by other devices around you and helps protect your device from malicious software on the Internet.

You should also select this option if you're connected directly to the Internet without using a router or if you have a mobile broadband connection.

The device is connected to a network that contains an Active Directory domain controller. A corporate network is one example of a domain network. This network location isn't available as an option. It must be set by the domain administrator. For your small business network, make sure that the network location type is set to Home or Work. Here's how to check:. For Windows Vista, certain sharing options turn on automatically.

For home or small office networks when you know and trust the people and devices on the network. Network discovery is on by default. For networks in public places such as coffee shops or airports. This location keeps your device from being visible to other devices around you and helps protect your device from any malicious software on the Internet. Network discovery is turned off for this location.

If your network consists of devices that are running similar hardware and software, you can select the option to download additional printer drivers on the host system.

We do not recommend this option if you have a mixed network that includes more than one combination of bit and bit operating systems. If your network contains devices running different versions of Windows, put all devices in the same workgroup. This makes it possible for devices that are running different versions of Windows to detect and access one another.

Remember that the default workgroup name is not the same in all versions of Windows. If Windows XP devices still don't appear on the network map even after you install the LLTD protocol, check your Windows firewall settings and make sure that file and printer sharing is enabled.

If you're using another firewall, see the information that was included with your firewall. Skip to main content. This browser is no longer supported. Download Microsoft Edge More info. Contents Exit focus mode. Please rate your experience Yes No. Any additional feedback? Note If your small business has lots of floor space, such as a manufacturing facility, you may experience signal degradation if there are very long cables between devices. Note You might be asked for an administrator password or to confirm your choice.

Note The transfer times listed are under ideal conditions. Note Metal objects, walls, and floors can interfere with your router's wireless signals. Note Protect your router by changing the default user name and password.

Note Whenever possible, you should connect to a security-enabled wireless network. Note The Device Name for each device on the network must be unique, and the workgroup for all devices on the network must be the same. It's unavailable for domain networks. On VPN or dial-up connections, you must connect to the network first, then press and hold or right-click the network name.

Turning on sharing changes your firewall settings to enable some communication, which can be a security risk. Not Helpful 6 Helpful 5. VMWare does not virtualize a wireless card. These directions would only be applicable if you used PCI Passthrough with a wireless card in your host computer.

Not Helpful 0 Helpful 0. Include your email address to get a message when this question is answered. By using this service, some information may be shared with YouTube. Submit a Tip All tip submissions are carefully reviewed before being published. You Might Also Like How to. How to. About This Article. Tested by:. Co-authors: Updated: May 6, Do you have any other devices routers,switches other then the mesh devices and the virgin router?

I just had a quick look trough the manual and it defaults to router mode as you are still using the virgin router put it in access point mode rgds steve. Hello, I would like to setup a home network using a standard router and then connect the network to the internet using a mobile phone.

Are there instructions available for this type of setup? Is there a better way. Perhaps using a bridge? Regards, Al Plevna Ontario. The easiest way is to use a router with mobile capability. There are lots available as they are used for travelling. In this case mobile is used as a backup. I have an existing Belkin router and need to expand the coverage to three locations..

What do I need to accomplish this task. I have very slow dsl modem, however I want to run my other computer on a home network to share files how can i bypass the slow modem that came with bell to get the connections between the other computers the fastest to share files between the computers. Just get a GB ethernet switch and plug all your ethernet cables into it and one cable connects your GB switch to the modem Ethernet which gives your devices Internet access.

The smart phone picks up its signal from the output of the router. Is there another way, or only with that cable. Fibre has been delayed in my area for mths. Could that still work through the switch, or would I be expecting too much.

Yes you should be able to plug your adsl router into a switch port on the HP device using an ethernet port on the router. Apparently login is admin no password.

Thank you for information. I have a little different issue I am having trouble with. I have windows 10 computer and a windows server as a backup and storage. I have home movies I want to access from a 3rd Windows 10 computer. I have no cable internet access as I am out of the service area. When I do connect to the internet, it is with my smart phone as a hotspot. I have to work from home quite a bit, so as far as I know, I cannot set up a wireless router and static IP addresses.

The server and Windows 10 computer 1 see each other and communicate easily without problems. I have each hard wired into a netgear switch. I connected Windows 10 computer 2 to the same switch, but cannot connect to each of the other 2 units Windows and server User names and passwords match on each machine. Do you have any advice about how to get the Windows computer to talk to the other 2?

Your advice is appreciated. Thanks, john. John for all computers to see each other they would need to connect to the hotspot on your phone. You can buy mobile wi-fi routers which would be a much better solution.

On my work pc. They are both set to automatic IP setting. Thanks, Hamis. I have a work computer and a home laptop. The work computer is wired to my router and a line to my wall. I use wifi on my laptop. Is my connection for home use private or can my company access my interaction on my laptop since I know they can pop onto my screen to see what I do on the work computer. What sort of networking would I need to have to prevent them from joining onto my personal laptop?

I would assume that the company installed software on the work computer to allow them to access it remotely. If you have cable or fibre to the home then this is usually a coax cable. Does that make sense?

I have a wired Ethernet home network which was installed at least 10 years ago. We were able to share files, printers etc on 3 laptops around the home We had a very good internet service to manage the network. It identified any additional hardware and installed it into the system.

However, it was bought out by Corel some years ago and closed down! Nothing similar that I could find has appeared since. Now with Windows 10 eliminating Home Group we have so far been unable to set up a replacement network. Windows instructions for sharing on a home network are complex to say the least!

So what now? Do I need to uninstall the remnants of the old network and install some thing new? What is it? Perhaps there is a programme somewhere like the one described above?

Going wireless is not an easy option because of interfering structures in the home.