Blade 400 instruction manual

To view our full range of radio control models including rc planes and radio control helicopters click on the relevant links. Go to content Go to navigation. Menu Search Basket 0. The UK's leading online model shop. X Close. Login Register. Basket 0 items. A Buyer's Guide to Page 8: Charge Errors And Indications Although the Electronic Speed Control ESC installed on your Blade 3D model is programmed to help prevent deep overdischarge of the Li-Po battery, you must exercise proper care of the battery if it is used in another application.

You must also be sure that the battery is never left plugged into the ESC for an extended period of time after flying in order to prevent overdischarge. Page 10 Then, plug the battery into the battery lead of the ESC. While viewing the helicopter from the rear tail boom toward you , move the right-hand stick left and right to check aileron roll control. When the stick is pushed to the left, the swashplate should also tilt left.

Page Electronic Speed Control Esc Features, Arming And Motor Control Test After each flight, be sure that you never turn off the transmitter before any problems relating to your Blade 3D responding properly to the transmitter, do not fly. Call disconnecting the flight battery from the ESC first. This gyro offers approximately the middle position. Page 13 Note: It is extremely important that you do not move or sway the helicopter In the case of the Blade 3D, it is generally preferred to fly with the gyro set to the Heading after powering it on and before the gyro initializes.

The gyro must be allowed Lock mode. Page 15 Moving the left-hand stick to the left will turn yaw the nose of the helicopter to the left about the axis The elevator trim can be used to help keep the helicopter from drifting forward or backward when in of the main shaft. This is accomplished by changing the pitch of the tail rotor blades.

Page Before Making Your First Flight While it is possible for the Blade 3D to be flown indoors, we suggest that it only be in a very large indoor facility such as a gym with proper approval that is also free of people and obstructions. Page Main Rotor Blade Tracking Adjustment Continue to make trim adjustments until the helicopter can hover at a low altitude with very little the main rotor blades of your Blade 3D up to speed.

You can check the blade tracking either on drifting and directional control input. Page Head Dampening Shims And Tuning Cyclic Response The rotor head main rotor blade dampening of your Blade 3D model can be adjusted in order to shaft, and where the tail rotor control pitch slider bushing rides on the tail rotor shaft. Page Flybar Paddle Tracking Adjustment Head Dampening Shims and Tuning Cyclic Response The rotor head main rotor blade dampening of your Blade 3D model can be adjusted in order to tune the cyclic response and stability of your model.

A model aircraft shall be defined as a non-human-carrying device capable of sustained flight in the atmosphere. It shall not exceed Some of the most important things to check routinely include: limitations established in this code and is intended to be used exclusively for recreational or competition activity. Page Exploded View Parts Listing Canopy Mount Rod EFLH Page Replacement Parts List to find the latest in new Please see your favorite retailer or visit our web site www.

Spektrum is used with permission of Bachmann Industries Inc. Print page 1 Print document 25 pages. Rename the bookmark. Delete bookmark?

Cancel Delete. Delete from my manuals? Sign In OR. Don't have an account? Sign up!