Keyboard regional settings windows 7

The text labels are useful if you undock the language bar from the taskbar and choose your own location for it since you will then see the full name of the selected keyboard. When you press this key, any text that you write afterwards will only be in uppercase letters.

Normally, to turn this function off, you press the Caps Lock key again. In this menu, you can set the Shift key to turn off the Caps Lock function instead. You can also configure the keyboard shortcut that lets you switch between input languages in Windows 7. If your language bar is not visible , it is quick and easy to restore it. To do so, use the search function in Windows 7. A number of options will be displayed.

You can also change the system language in Windows 7. This has a more wide-reaching effect on your system and allows you to display the user interface in your preferred language.

However, you will often need to install a new language pack to do this. Even years after it was first released, Windows 7 continues to be one of the favorite operating systems worldwide. But with Microsoft announcing the end of its support for Windows 7, many PC users will need to upgrade or look for an alternative. Windows 7 EOL means that Microsoft will no Here it goes. This section deals with the settings configured on the first tab, Formats , of the Regional Settings Control Panel item.

Ever since the introduction of Group Policy Preferences with Item-Level Targeting first introduced with Windows Server , managing regional settings has been a breeze. With a right-mouse click on Regional Options select New. I recommend to execute this policy in the user's security context tick the Run in logged-on [ One way to distinguish users is to filter based on Active Directory security group membership, for example:.

The regional settings consist of multiple values. You find all settings in the following registry key:. It may happen that after configuring the regional settings for a user, the time in the system tray is not shown in the correct format. You can correct the time format on the Time tab in the Regional Settings Group Policy Preference see also the previous paragraph or directly in the registry using either a script or a Group Policy Preference.

Please take a look at the screenshot below. In the example below, the time is not displayed as it should be. The exact registry key and value are:. A capital H sets the clock to a hour format; a small h sets the clock to a hour format.

A double hh or HH adds a leading zero when the hour is one digit only. Also, note the space between the clock settings and the tt value. The drop down menu in the Regional Settings does not allow you configure this, but you can configure this on the Time tab of the Regional Settings Group Policy Preference and by directly configuring the registry using a Group Policy Preference registry item for example.

Now we have all the information we need to set the correct time configuration for all users. There are two easy ways how to accomplish this:. Please read the section Configuring regional settings using Group Policy in this article to understand how to configure the user's regional settings. After you have configured at least one regional setting configuration, modify this configuration and go to the Time tab. On this tab you can modify the time format to anything you want.

Before you can modify anything, first make sure to press the F5 button to turn all the red lines to green lines. Green lines indicate that anything you change will be saved after clicking the Apply or OK button.

At the bottom of the tab a detailed description of the various configuration options is provided. Configure the registry item as follows:. In case you require multiple locations for a variety of scenarios within the same Group Policy, use an Item-Level Targeting filter.

This is explained in the section Configuring regional settings using Group Policy. The registry item is now created and will be deployed to all users to whom the particular Group Policy applies.

This section deals with the Home Location setting configured on the second tab, Location , of the Regional Settings Control Panel item. Instead, a Group Policy Preference registry item needs to be used. To determine the country ID, change the location manually on the second tab of the Control Panel item Regional Settings and than check the aforementioned registry value.

For example, when I select Austria as my location, the value Nation is set to Before it was , which is the country ID for the United States.

Now we have all the information we need to set the correct location for all users. The easiest way to accomplish this is by using a Group Policy Preference. Probably an alphabetical list of some sort…. Thanks for the article, however how can we apply a GPO to change the date format to a group of computers no matter who is logged in. Our target is computer and not user. Good question. By default, the date and time format of the local system is copied to new user profiles.

But in the end, the date and time format is a user-specific setting. My point is that displaying different date and time formats on different servers still requires you to change settings for the user.

I would proceed as follows: 1 Enable loopback processing mode on all servers this is a machine-specific policy ; 2 Create a separate OU that reflects each date and time format you may need e.

Optionally, create separate user profiles for these server groups. Hi Dennis, Thanks for the artical, I have just one question. In the "ID" , the portion of the number in front of the colon "" represents the Region Keyboard ie English Canada. The number after the colon "" is the actual language installed for that keyboard.

Another thing that I learned is that the region codes on the MS site were not displayed properly, which is why I wasn't able to change the "Locale" properly. This link contains the values you need to use when changing the "Locale". The other thing I ended up having to do was to create two different XML files and run them one after the other. For some reason, removing the English Canada keyboard and all of it's sublanguages then adding the English US keyboard in the same script was producing an error that was stopping the XML file from applying properly.

However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.

For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows.

The first time that a user uses a Remote Desktop Connection to log on to a server that has Terminal Server enabled, a new profile is created. The new profile inherits the Regional and Language Options settings from the default user profile. The profile may be local to the terminal server or may reside on a network share. However, the Default input language setting is obtained from the client computer that initiated the Remote Desktop Connection.